WRAPPING and BANDING SHOW COATS

 

I use a chopstick to part the coat, and take small sections and rubber band them in such a way as they are not too tight to the skin.   I start just behind the eyes, and make this one section.

 

 

Next section goes from here to just in front of the ears.

 

 

I link the first two sections together to form one larger section.

 

 

When the coat gets long enough, this new group is linked to the part above the ears to keep it further back from the face.

 

How far down the back you go depends upon how long the coat is, and how much rough and tumble play your dogs do.    The more playing and running, the more sections I use to protect the long coat.

 

 

EARS

 

If you are just starting to grow coat on your dog, or have a puppy just starting out who does not have enough hair to section and band, or wrap, I still recommend banding a little bit.   As soon as my puppies have enough hair to be held together,  I use a small band (like the kind used for braces).    I will put it at the bottom of the ears holding a few hairs together, and above each eye.    The reason I do this is to get the pup used to having something in the ears and in their hair.    If they try to rub it out or chew it off (ears) you can train them to leave it,  but if they succeed in chewing or breaking off hair, you have not lost much.    If you wait until you have an inch or more of hair to protect, and the pup chews off his ear - it can set you back a month or more while you wait for it to grow back.

 

 

WRAPPING COATS

 

Some coats are more harsh than others, and do not respond well to being banded.    Harsh coats can break easier than the softer and more pliable coats.    One of my dogs has a coat that is very harsh, and instead of banding the topknot,  I wrap each section in plastic, and then band the plastic.    No rubber bands stay on the hair itself.

 

First thing I do is section the hair and put a band around just to hold each section as I work

And wrap it.

Wrap the hair in the plastic, fold it over and rubber band it securely.

 

 

When the wrapper is banded in place, I carefully remove the band that is holding the hair parted into sections.

Once you have finished this, you are done for the moment.    Depending upon the coat type and texture as well as the age of the dog,  you will need to take everything out and brush/comb the coat thoroughly and then re-band/re-wrap it until the next brushing section.

NEVER try to remove the rubber band.   Just CUT them out carefully.    I use a small square plastic letter opener - the kind with a point on one side and a small razor set back into the plastic.

This slips under the rubber bands very easily, and you can use it to just slip under the band and ZIP - it's cut, leaving the hair uncut.   There are also small scissors designed to cut bands, but why spend the money for that, when you can get a little letter opener for next to nothing?

 

Feel clumsy wrapping? Don't worry - you will get lots of practice very quickly.

 

 

Grooming Basic Grooming Equipment Brushing Clipper Blade Info Clipping The Face Clipping The Feet Clipping The Tail Bathing And Drying Lamb Trim ~ Pre-Bath Lamb Trim ~ Finishing

 

 

 

 

Home Is the Poodle right for you? About Us    Our   Family  What's New Photo Gallery Raw Natural Diet Puppies Friends & Links Contact Us